Humidifier

Humidifier is basically an Atomizing Humidifier of splash plate rotating disc type. Design to give relative humidity as high as up to 95% RH in enclosed areas. Humidifier is a portable unit body made of Aluminum/ Stainless steel. Capable of atomizing up to three liters of water in an hour at full evaporation in the driest possible ambient conditions. Provided with automatic flout valve assembly to work on 220V AC.

Capacity: 5 Liters

Optional: Control box with Humidistat for controlling.

Humidifier Manufacturers

Humidifiers can be manufactured using a variety of methods and materials, depending on the specific type of humidifier being produced. Some of the common types of humidifiers include ultrasonic humidifiers, evaporative humidifiers, steam humidifiers, and impeller humidifiers.

Here is a general overview of the manufacturing process for a basic ultrasonic humidifier:

1. Injection molding: The body of the humidifier is typically made from plastic and is manufactured using injection molding techniques. This involves melting plastic pellets and injecting them into a mold, which is then cooled and hardened to form the body of the humidifier.
2. Ultrasonic transducer: The ultrasonic transducer is the component of the humidifier that produces the mist. It is typically made from a ceramic material that is capable of vibrating at high frequencies. The transducer is attached to the bottom of the water tank.
3. Water tank: The water tank is usually made from plastic and is designed to hold the water that will be used to produce the mist. The water tank is connected to the ultrasonic transducer by a small tube.
4. Circuit board: The circuit board is the electronic control center of the humidifier. It regulates the frequency of the ultrasonic transducer and controls the mist output.
5. Assembly: Once all the components have been manufactured, they are assembled into a finished product. This involves connecting the water tank to the ultrasonic transducer, attaching the circuit board, and adding any additional features, such as a control panel or LED lights.
6. Testing: The humidifier is then tested to ensure that it is functioning properly and producing mist at the desired rate. Any defects or malfunctions are identified and addressed before the humidifier is packaged and shipped to retailers or distributors.

The manufacturing process for other types of humidifiers may differ slightly, but typically involves similar steps, such as molding the body, assembling the components, and testing the finished product for quality and performance. Get order online from educational lab equipment and get satisfy with product we are Humidifier manufacturers since 1998.